Diffusers
|
SqCeilingDiffuserRect "Square Diffuser Top"
|
Top Square Ceiling Diffuser — Diffusers
connected to square ducts and mounted on ceilings are suitable for the
introduction of supply air or the removal of extract air in the ceiling.
|
SqCeilingDiffuserRect "Square Diffuser Side"
|
Side Square Ceiling Diffuser — Square
diffusers with side entry air connection.
|
SqWallDiffuserRect "Square Diffuser Top"
|
Square Wall Diffuser — Diffusers typically
placed against a wall or pillar on the floor, provides a 180° displacement air
pattern around the diffuser.
|
SqFloorDiffuserRect "Square Diffuser Top"
|
Square Floor Diffuser — Diffuser ideal for
vertical air supply, for use in auditoriums, theatres, concert halls,
classrooms etc. where limited distance between diffuser and seat is maintained.
|
LinearSlotDiffuser "Linear Slot Diffuser"
|
Linear Slot Diffuser — Ceiling-installed
diffusers, typically placed around the perimeter of rooms. These have a higher
discharge velocity than a louvered ceiling.
|
PlenumBoxRectMultiPort "Top"
|
Multi Port Plenum Box Rectangular (Top) —
The top entry plenum box. Multi port plenum boxes provide the connection
between grilles and diffusers, and the appropriate ductwork either extracting
or supplying air. Essentially plenum boxes are just as important as both the
grille and ducting. They placed to as high pressure containers.
|
PlenumBoxRectMultiPort "Side"
|
Multi Port Plenum Box Rectangular (Side) —
Side entry plenum style enables connecting in ductwork with spring operated
dampers.
|
JetNozzleDiffuserFlat "FlatSide"
|
Flat Jet Nozzle Diffuser — The direction of
the air stream from the jet nozzle can be easily adjusted manually to suit
particular on site conditions. Also with the use of electric actuators the
pivoting movement can be motorized within the range of ± 30° rotates the nozzle
rotated only in one plane up to 30° upwards (cooling) up to 30° downwards
(heating).
|
JetNozzleDiffuserFlat "PanelFlatSide"
|
Panel Jet Nozzle Diffuser — To ease the
simultaneous mounting of different jet diffusers side by side on a wall or a
duct, the possibility is given to get two or three jet nozzles pre-mounted on a
single panel. The panel is then fixed onto a wall or other panel.
A rear duct connection element with a peripheral flange and
optional spigot or a saddle connector with flange provides options for fixing
to the side of rectangular or circular ducts.
|
SqCeilingDiffuser "Square Diffuser Top"
|
Top Square Ceiling Diffuser — Square
diffuser with top entry air connection in rounded ductwork at ceilings.
|
SqCeilingDiffuser "Square Diffuser Side"
|
Side Square Ceiling Diffuser — Square
diffuser with side entry air connection in rounded ductwork at ceilings.
|
RndCeilingDiffuserRnd "Round Diffuser Top"
|
Top Round Ceiling Diffuser — Round shape
diffuser with top entry air connection in rounded ductwork at ceilings.
|
RndCeilingDiffuserRnd "Round Diffuser Side"
|
Side Round Ceiling Diffuser — Round shape
diffuser with side entry air connection in rounded ductwork at ceilings.
|
PlenumBoxRoundMultiPort "Top"
|
Multi Port Plenum Box Round (Top) — The top
entry plenum box connected to round ducts.
|
PlenumBoxRoundMultiPort "Side"
|
Multi Port Plenum Box Round (Side) — Side
entry plenum style for connecting in round ductwork.
|
SqWallDiffuser "Square Diffuser Top"
|
Square Wall Diffuser — Square shape
diffuser connected in round ductwork. Ideally placing against a wall or pillar
on the floor that provides a 180° displacement air pattern around the diffuser.
|
RndWallDiffuserRnd "Round Diffuser Top"
|
Round Wall Diffuser — Round shape diffuser
connected in round ductwork.
|
RndFloorDiffuserRnd "Round Diffuser Top"
|
Round Floor Diffuser — Round diffuser,
mounted on floors through round ductwork, serves best for vertical air supply
in big rooms, such as auditoriums.
|
SqFloorDiffuser "Square Diffuser Top
|
Square Floor Diffuser — Square diffuser,
mounted on floors through round ductwork.
|
JetNozzleDiffuserCircular "CircularEnd"
|
Round Jet Nozzle Diffuser — Jet Nozzle
Diffuser is a high capacity diffuser with jet-type airflow specifically
designed for spot heating or cooling in high ceiling applications, such as
convention centers, meeting halls and auditoriums. The fixed nozzles can be
installed for horizontal throw (for cooling) or vertical throw (for heating).
|
SqCeilingDiffuserOval "Square Diffuser Top"
|
Top Square Ceiling Diffuser — Diffusers
connected to oval ducts and mounted on ceilings. Suitable for the introduction
of supply air or the removal of extract air in the ceiling.
|
SqCeilingDiffuserOval "Square Diffuser Side"
|
Side Square Ceiling Diffuser — Square
diffusers with side entry air connection.
|
SqWallDiffuserOval "Square Diffuser Top"
|
Square Wall Diffuser — Diffusers connected
to oval ducts placed against a wall or pillar on the floor, provides a 180°
displacement air pattern around the diffuser.
|
SqFloorDiffuserOval "Square Diffuser Top"
|
Square Floor Diffuser — Square diffusers
mounted in oval ductwork, providing for vertical air supply, for use in big
rooms such as auditoriums, theatres, etc., where limited distance between
diffuser and seat is maintained.
|
PlenumBoxOvalMultiPort "Top"
|
Multi Port Plenum Box Oval (Top) — The top
entry plenum box with oval shape spigot.
|
PlenumBoxOvalMultiPort "Side"
|
Multi Port Plenum Box Oval (Side) — Side
entry plenum style box with oval spigot.
|
Grilles
|
Rect4WayEndGrille 4Way
|
4 Way End Grille — 4 way blow pattern
diffuser grilles for air distribution distributes air in all sides. Grille with
damper (by setting the
With Damper property true), functions
register and add deflection to the air flow.
|
RectBarsEndGrille Bars
|
Bar End Grille — Linear bar grilles offer a
choice of fixed air patterns suitable for supply air application in floors,
sills, and high sidewall locations.
|
RectBarSlotsEndGrille "Bar Slots"
|
Bar Slot End Grille — Bar slot grilles with
1 to 10 slots are suitable for ceiling and high sidewall installation and
eminently suited to VAV application.
|
RectMeshEndGrille Mesh
|
Mesh End Grille — Mesh end grilles in
ducting help evenly distribute airflow throughout the space.
|
RectStarEndGrille Star
|
Star End Grille — Perforated star end
grilles provide diagonal throw air pattern.
|
RectRndSlotsEndGrille "Round Slots"
|
Round Slot End Grille — Perforated round
slots grilles spread steady air pattern.
|
RectRectSlotsEndGrille "Rectangular Slots"
|
Rectangular Slot End Grille — The slot end
grille is suitable in ceiling tile. It provides full 180° air pattern
adjustment and tight horizontal air patterns.
|
RectStarGrille Star
|
Star Side Grille — Perforated star end
grilles provide diagonal throw air pattern.
|
RectRndSlotsGrille "Round Slots"
|
Round Slot Side Grille — Perforated round
slots grilles spread steady air pattern.
|
RectRectSlotsGrille "Rectangular Slots"
|
Rectangular Slot Side Grille — The slot
side grille is suitable in ceiling tile. It provides full 180° air pattern
adjustment and tight horizontal air patterns.
|
RectMeshGrille Mesh
|
Mesh Side Grille — Mesh side grilles in
ducting help evenly distribute airflow throughout the space.
|
RectBarSlotsGrille "Bar Slots"
|
Bar Slot Side Grille — Bar slot grilles
with 1 to 10 slots are suitable for ceiling and high sidewall installation and
eminently suited to VAV application.
|
RectBarsGrille Bars
|
Bar Side Grille — Linear bar grilles offer
a choice of fixed air patterns suitable for supply air application in floors,
sills, and high sidewall locations.
|
Rect4WayGrille 4Way
|
4 Way Side Grille — 4 way blow pattern
diffuser grilles for air distribution distributes air in all sides.
|
GrilleRoundEnd4Way 4Way
|
4 Way End Grille — 4 way blow pattern
diffuser grilles for air distribution distributes air in all sides.
|
GrilleRoundSide4Way 4Way
|
4 Way Side Grille — 4 way grille connected
by side of the duct.
|
GrilleRoundEndBars Bars
|
Bar End Grille — Linear bar grilles offer a
choice of fixed air patterns suitable for supply air application in floors,
sills, and high sidewall locations.
|
GrilleRoundSideBars Bars
|
Bar Side Grille —Bar grille connected by
side of the duct.
|
GrilleRoundEndBarSlots "Bar Slots"
|
Bar Slot End Grille Bar — Bar slot grilles
with adjustable slots are suitable for ceiling and high sidewall installation
and eminently suited to VAV application.
|
GrilleRoundSideBarSlots "Bar Slots"
|
Bar Slot Side Grille — Bar slot grilles
connected by side of the duct.
|
GrilleRoundEndMesh Mesh
|
Mesh End Grille — Mesh end round grilles in
ducting help evenly distribute airflow throughout the space.
|
GrilleRoundSideStar Star
|
Star Side Grille — Perforated star side
grilles equipped with radial slots provide diagonal throw air pattern.
|
GrilleRoundEndStar Star
|
Star End Grille — Perforated star end
grilles provide diagonal throw air pattern.
|
GrilleRoundSideRndSlots "Round Slots"
|
Round Slot Side Grille — Perforated round
slot side grilles spread steady air pattern.
|
GrilleRoundEndRndSlots "Round Slots"
|
End Grille Round Slots — Perforated round
slots grilles at duct end.
|
GrilleRoundSideRectSlots "Rectangular Slots"
|
Rectangular Slot Side Grille — The slot
side grille is suitable in ceiling tile. It provides full 180° air pattern
adjustment and tight horizontal air patterns.
|
GrilleRoundEndRectSlots "Rectangular Slots"
|
Rectangular Slot End Grille — Slot grille
at duct end, usually in ceiling tile suitable for evenly spread air pattern.
|
GrilleRoundSideMesh Mesh
|
Mesh Side Grille — Mesh end grilles in
ducting help evenly distribute airflow throughout the space.
|
OvalMeshEndGrille Mesh
|
Mesh End Grille — Mesh side grilles in
ducting help evenly distribute airflow throughout the space.
|